Table of Contents
Advertisement
A
6.3 ADJUSTING HEIGHT
If the height of the enclosure is 337/8" to 357/8"
(861 mm - 911mm) adjust supports as shown in
the figure.
Supplied (4)
Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to
the enclosure height.
Adjust the rear foot level with a screwdriver to
balance and raise the dishwasher to the enclosure
T20
height.
• Make sure the dishwasher is plumb and notice
• Turning the screwdriver in the direction of the
• Turning the screwdriver in the direction of the
6.4 INSTALLING THE SIDE TRIM
STRIPS
1. Remove the adhesive tape (Figure A).
Place the trim strips on the front edge of the side
walls (Figure B).
• Make sure you use the correct trim strip since
B
NOTICE :
dishwasher can be placed with a small clearance
under the counter top.
black arrows will bring the dishwasher back feet
up.
white arrows will take the dishwasher rear feet
down.
NOTICE :
there is a left and right side strip. The flexible
material should be facing forward (Figure B).
7
USA
Advertisement
Table of Contents
