Enclosure Preparation; Electrical Preparation; Preparation For Installing Mounting Brackets; Adjusting Height - Blomberg DW 55502 FBI Installation Manual

6. ENCLOSURE PREPARATION

6.1 ELECTRICAL PREPARATION

WARNING
The dishwasher is designed for an electrical supply of 120 V, 60 Hz, AC, connected to a
dishwasher-dedicated, properly grounded electrical circuit with a fuse or breaker rated
for 15 amperes.

6.2 PREPARATION FOR INSTALLING MOUNTING BRACKETS

B
B

6.3 ADJUSTING HEIGHT

Measure the height of the
enclosure.
A
?
6
WARNING
Dishwasher must be secured to adjacent
cabinetry using the mounting brackets
provided. Failure to do this may cause
damage to property or bodily injury.
Place the two mounting brackets into the
top corners of the dishwasher.
Bend sides of mounting brackets (A) in
order to fix from sides (if necessary).
Notice :
• For thes model, DW 55100 FBI note that
extra bending should be done on the
brackets as shown.
USA
A