Timer-Repeat - Suunto N6HR Instruction Manual

3.6.3. Timer-Repeat

This feature allows you to set multiple intervals for your chrono-
graph. Suunto n6
another and after they are finished, it stops the chronograph. You
will hear a beeping sound after each interval.
1. Enter the Chrono mode.
2. Press ENTER to access the chronograph sub-menu.
3. Select Timer Intervals.
4. Select Timer-Repeat.
5. Select the number of intervals (1-20) you need with PREVIOUS and NEXT/STOP,
and press ENTER.
6. Set the first interval (seconds and minutes) with PREVIOUS or NEXT/STOP, and
accept the selections with ENTER.
7. Set the next interval(s) in a similar manner. After the last one is set, the message
' -
TIMER REPEAT INTERVALS SET
display.
8. Press ENTER to access the chronograph sub-menu.
9. Select Timer.
10.Select Timer-Repeat. The message '
you return to the chronograph display.
11.Use PREVIOUS to toggle between the chronograph, timer and current time.
12.Press START/LAP/LIGHT to start the chronograph. An alarm will sound at each
designated interval. The chronograph stops automatically when all intervals have
been met. If you wish to continue with the chronograph, press START/LAP/LIGHT.
13.Press and hold NEXT/STOP for 2 seconds to reset the chronograph.
activates the set interval times one after
HR
' is displayed, and you return to the chronograph
-
TIMER REPEAT ACTIVATED
' is displayed and
25