Table of Contents
Advertisement
3.4.
CHRONO MODE
3.5.
CHRONOGRAPH
With the chronograph you can time events—such as your daily run—and record lap
times. You can record up to 50 laps.
To use the chronograph:
1. Enter the Chrono mode.
2. Press START/LAP/LIGHT to start the chronograph.
3. Press START/LAP/LIGHT while the chronograph is running to store a split time.
NOTE: The chronograph will temporarily freeze, then continue counting. Your split
time and number are displayed in the bottom left corner of the screen.
4. Press NEXT/STOP to stop the chronograph.
5. Press NEXT/STOP to view your individual splits.
6. Press and hold NEXT/STOP for 2 seconds to reset the chronograph.
22
In this mode, you can time your activities and monitor your heart
rate. You can also use various timers to customize your training
sessions and set the heart rate limits. The heart rate is visible on
the top row of the main display when you wear the HR
transmitter belt and your Suunto n6
from the belt. If there is no signal, the top row displays ---.
receives the HR signal
HR
Advertisement
Table of Contents
