Table of Contents
Advertisement
Chapter 4: BIOS
Supervisor Password Is:
This feature indicates if a supervisor password has been entered to the system.
Clear means such a password has not been used, and Set means a supervisor
password has been entered.
User Password Is:
This feature indicates if a user password has been entered to the system. Clear
means such a password has not been used, and Set means a user password has
been entered.
Set Supervisor Password
When the item Set Supervisor Password is highlighted, hit the <Enter> key. At the
prompt, enter the Supervisor's password in the dialogue box to set or to change
supervisor's password to allow the user to access the BIOS with the privileges as
a supervisor.
Set User Password
When the item "Set User Password" is highlighted, hit the <Enter> key. When
prompted, enter the user's password in the dialogue box to set or to change the
user's password to allow the user to access the system at boot-up.
Password on Boot
This setting allows you to determine if a password is required for a user to enter the
system at system boot. The options are Enabled (password required) and Disabled
(password not required).
4-25
Advertisement
Table of Contents
