Console Redirection - Supermicro X7DCA-3 User Manual

X7DCA-3/X7DCA-i User's Manual

Console Redirection

Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify which COM port to direct the remote console to:
Onboard COM A or Onboard COM B. The default setting is Disabled.
BAUD Rate
This item allows you to set the BAUD rate for console redirection. The options are
300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to set console redirection type. The options are VT100,
VT-UTF8 and ASCII.
VT100/8bit, PC-ANSI/7bit, PC ANSI, VT100+,
Flow Control
This item allows you to select the fl ow control option for console redirection. The
options are: None, XON/XOFF, and CTS/RTS.
Console Connection
This item allows you to decide how console redirection is to be connected: either
Direct or Via Modem.
Continue CR after POST
This item allows you to decide if you want to continue with console redirection after
the POST routine. The options are On and Off.
4-16