Table of Contents
Advertisement
X7DCA-3/X7DCA-i User's Manual
type. Select User to allow the user to enter the parameters of the HDD installed.
Select CDROM if a CDROM drive is installed. Select ATAPI if a removable disk
drive is installed.
CHS Format (Available on the Primary Master/Slave slots only)
The following items will be displayed by the BIOS:
TYPE:
This item displays the type of IDE or SATA Device.
Cylinders:
This item indicates the status of Cylinders.
Headers:
This item indicates the number of headers.
Sectors:
This item displays the number of sectors.
Maximum Capacity:
This item displays the maximum storage capacity of the system.
LBA Format
Total Sectors:
This item displays the number of total sectors available in the LBA Format.
Maximum Capacity:
This item displays the maximum capacity in the LBA Format.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
in multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors, and
16 Sectors.
LBA Mode Control
This item determines whether the Phoenix BIOS will access the IDE Channel 0
Master Device via the LBA mode. The options are Enabled and Disabled.
32 Bit I/O
This option allows the user to enable or disable the function of 32-bit data transfer.
The options are Enabled and Disabled.
4-4
Advertisement
Table of Contents
