Troubleshooting - A&D UA-1200CNBLE Instruction Manual

TROUBLESHOOTING

Symptom Probable Cause
Power Low Battery.
does not
Blood Pressure
turn on.
monitor internal
error.
Battery charging
cable is connected.
The cuff Low Battery.
does not
inflate.
The Airplane mode is
monitor
ON
is not
Blood Pressure
connecting
monitor internal
to
application
error.
The device You moved your
does not arm or body during
measure. measurement.
Readings
are too
high or too
low.
The cuff position is
not correct.
––––
Treatment
Charge the battery.
Press the Reset Switch.
Remove the charging cable.
Charge the battery.
Check page E-24 to turn Airplane
mode OFF
Press the Reset Switch.
Make sure you remain still and
quiet during measurement.
If you have a very weak or
irregular heartbeat, the device
may have difficulty in determining
your blood pressure.
Sit comfortably and still. Place
your arm on a table with your
palm facing upward and the cuff
at the same level as your heart.
E-25