Table of Contents
Advertisement
Troubleshooting
Answering System
Problem
The Answering System is
on, but incoming messages
are not recorded.
"
" is displayed and
FULL
the ANSWER ON indicator
flashes rapidly, and no new
messages are recorded.
You cannot access the
Answering System from
the base unit or the
handset.
You cannot access the
Answering System from a
touch tone phone.
During playback on the
handset, incoming call
tones are heard.
When you play back
messages or you turn the
Answering System on, the
unit announces the wrong
day.
68
Cause & Remedy
•The recording time is set to "Greeting only".
Select "1 minute", "2 minutes" or "3 minutes"
(p. 23).
•Memory is full. Erase some, or all, of the
messages (p. 51).
•Memory is full. Erase some, or all, of the
messages (p. 51).
•If more than one other user is using the
handsets and base unit, you may not be able
to access the Answering System. Try again
later.
•If the Answering System is responding to a
call or another user is listening to messages
in the Answering System, you cannot access
the Answering System. Try again later.
• While 2 other handsets are making a
conference call, you cannot access the
Answering System. Try again later.
•Your handset is too far from the base unit.
Move closer to the base unit.
•Make sure you enter the correct remote code
(p. 55).
•The Answering System may not respond if
the tones are too short to activate the unit.
Press each button firmly.
•The Answering System is off. Turn it on (p. 57).
• To answer the call, press
For playback, start again from the beginning
after hanging up.
• The date may be set wrong. Adjust the date
(p. 15).
or
.
Advertisement
Table of Contents
