Download
Share
Print this page
NCR FastLane SelfServ Checkout 7358 Kit Instructions
  1. Manuals
  2. Brands
  3. NCR Manuals
  4. Payment Terminal
  5. FastLane SelfServ Checkout 7358
  6. Kit instructions

NCR FastLane SelfServ Checkout 7358 Kit Instructions

Non-scale 2-bag bagwell upgrade
Hide thumbs Also See for FastLane SelfServ Checkout 7358:

Advertisement

Quick Links

Download this manual
Kit Instructions
Non-Scale 2-Bag Bagwell Upgrade
7358-K122/K145
Issue B

Advertisement

loading

Related Manuals for NCR FastLane SelfServ Checkout 7358

Summary of Contents for NCR FastLane SelfServ Checkout 7358

  • Page 1 Kit Instructions Non-Scale 2-Bag Bagwell Upgrade 7358-K122/K145 Issue B...
  • Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.

  • Page 3: Revision Record

    Revision Record Issue Date Remarks Jul 2020 First Issue Nov 2021 Updated Kit Contents...
  • Page 5 Checkout (7358), either a from No-Bag unit or a unit with an existing Bagwell, to a unit with a Non-Scale 2-Bag Bagwell. The NCR FastLane SelfServ™ Checkout with a Bagging Area (Bagwell) Module or Large Basket (Large Basket) Module can be configured for either Left-hand (LH) orientation or Right-hand (RH) orientation, which refers to the direction customers scan and bag items.

  • Page 6: Kit Contents

    Non-Scale 2-Bag Bagwell Upgrade Kit Contents Depending on the color variant of the Non-Scale Bagwell, refer to the following sections for information about kit contents: • 7358-K122 Non-Scale 2-Bag Bagwell Upgrade (Walmart Medium Gray) on the facing page. • 7358-K145 Non-Scale 2-Bag Bagwell Upgrade (Walmart Light Blue) on page 6.
  • Page 7 Non-Scale 2-Bag Bagwell Upgrade 7358-K122 Non-Scale 2-Bag Bagwell Upgrade (Walmart Medium Gray)
  • Page 8 Non-Scale 2-Bag Bagwell Upgrade Part Number Description 497-0527862 7358-K122 Kit, 2-Bag Bagwell Module, Non-Scale with Lower Bagwell Bumpers (Walmart Medium Gray) 795-0283628 Assembly - 2 and 3-Bag Door (Walmart Medium Gray) 795-0134228 Panel - 2-Bag Backsplash (Walmart Medium Gray) 795-0134128 Panel - 2-Bag Front (Walmart Medium Gray) 795-0133328 Panel - 1/2/3 Bagwell Side (Walmart Medium Gray)
  • Page 9 Non-Scale 2-Bag Bagwell Upgrade Part Number Description 006-8612492 Screw - ¼–20 x 0.750 in, Phillips Flat Head, 82 Degree, Machine Thread, Zinc-Plated Steel (5 pcs) 497-0457054 Black Nylon Spacer 15 mm OD x 10.4 mm ID x 10 mm L (5 pcs) 497-0518274 Bumper - 1 Bag Rear, 2/3 Bag Door...
  • Page 10 Non-Scale 2-Bag Bagwell Upgrade 7358-K145 Non-Scale 2-Bag Bagwell Upgrade (Walmart Light Blue)
  • Page 11 Non-Scale 2-Bag Bagwell Upgrade Part Number Description 497-0528439 7358-K145 Kit, 2-Bag Bagwell Module, Non-Scale with Lower Bagwell Bumpers (Walmart Light Blue) 795-0283612 Assembly - 2 and 3-Bag Door (Walmart Light Blue) 795-0134212 Panel - 2-Bag Backsplash (Walmart Light Blue) 795-0134112 Panel –...
  • Page 12 Non-Scale 2-Bag Bagwell Upgrade Part Number Description 006-8612492 Screw - ¼–20 x 0.750 in, Phillips Flat Head, 82 Degree, Machine Thread, Zinc- Plated Steel (5 pcs) 497-0423108 Instructions Kit (Reference Sheet) * Items marked with an asterisk are not called out on the image.

  • Page 13: Installation Procedures

    Non-Scale 2-Bag Bagwell Upgrade Installation Procedures Installing the Bagwell upgrade involves the following procedures: • Installing Core Skirt Panels on the next page. Note: This procedure may be optional. • Removing Existing Non-Scale Bagwell on page 12. • Changing Bagwell Orientation on page 18.
  • Page 14 Non-Scale 2-Bag Bagwell Upgrade Installing Core Skirt Panels To install the Core skirt panels, follow these steps: Note: The 7358-K122 and 7358-K145 Kits include Core skirt panels that customers may use to replace their existing Core skirt panels. 1. On the front or back of the core, do the following: Note: The front and back skirt panels of the core must be installed before the side skirt panels of the core.
  • Page 15 Non-Scale 2-Bag Bagwell Upgrade 2. On either sides of the core frame, do the following: Note: The side skirt panels of the core the must be installed after the front and back skirt panels of the core. a. Attach the skirt panel to the skirt bracket by aligning the open slots in the skirt panel with the screw holes in the skirt bracket.
  • Page 16 Non-Scale 2-Bag Bagwell Upgrade Removing Existing Non-Scale Bagwell To remove an existing Non-Scale 2-Bag Bagwell, follow these steps: Note: To remove a Non-Scale 1-Bag Bagwell, refer to 7358-K121/K125 Non-Scale 1-Bag Bagwell Upgrade. To remove a Non-Scale 3-Bag Bagwell, refer to 7358-K165 Non-Scale 3- Bag Bagwell Upgrade.
  • Page 17 Non-Scale 2-Bag Bagwell Upgrade 2. Remove the clear plastic deflectors from the Backsplash and side of the Core. Note: Leave the Core side deflector in its place if the new Bagwell is attached on the same side.
  • Page 18 Non-Scale 2-Bag Bagwell Upgrade 3. Disconnect the following cables: • Local Area Network (LAN) Cable from the Customer Interface • AC Power Out Cables from the Power Strip • AC Power In Cable from the Power Strip Note: Remove cables from any routing clips or tie wraps if needed. 4.
  • Page 19 Non-Scale 2-Bag Bagwell Upgrade 5. Remove the upper rear screw attaching the Backsplash to the Core.
  • Page 20 Non-Scale 2-Bag Bagwell Upgrade 6. Remove the Bagwell by doing the following: a. Remove the two (2) bottom screws attaching the Bagwell to the Core. Screws are located on either side of power strip. b. Loosen the two (2) upper screws, but do not remove.
  • Page 21 Non-Scale 2-Bag Bagwell Upgrade c. Lift Bagwell up and away from the Core Cabinet. The upper screw heads will pass through the key holes in the Bagwell side support. Note: The two (2) upper screws may be left in place if a new Bagwell will be installed in the same orientation.
  • Page 22 Non-Scale 2-Bag Bagwell Upgrade Changing Bagwell Orientation To change the Bagwell orientation, follow these steps: Note: These steps should be done before attaching the Bagwell to the Core. For the purpose of illustration only, this procedure shows images using Left-hand (LH) orientation.
  • Page 23 Non-Scale 2-Bag Bagwell Upgrade 2. Remove the bumpers by doing the following: Note: Do not remove the front access door bumper a. Detach the Backsplash the Bagwell by removing seven (7) screws. b. Detach the wrap-around side bumper by removing three (3) flat head screws and spacers, as shown in the image below.
  • Page 24 Non-Scale 2-Bag Bagwell Upgrade 3. Remove two (2) nuts securing the front panel to the Bagwell frame located at the inside corner posts. 4. Pull down the front panel and then pull out to disengage from the slots in the Bagwell frame base, as shown in the image below.
  • Page 25 Non-Scale 2-Bag Bagwell Upgrade 5. Install the front panel on the opposite side of the Bagwell and secure it with two (2) nuts. Note: Ensure that the the lower hook features are properly aligned with the slots in the Bagwell frame base. 6.
  • Page 26 Non-Scale 2-Bag Bagwell Upgrade Installing New Non-Scale Bagwell To install the new Non-Scale Bagwell, follow these steps: Note: If changing the Bagwell orientation (Left-Hand or Right-Hand), ensure that the orientation is changed before installing the new Bagwell to the Core. For the purpose of illustration only, this procedure shows images using a Left-hand (LH) orientation unit.
  • Page 27 Non-Scale 2-Bag Bagwell Upgrade 3. Lower all the leveling feet of the Bagwell slightly beyond the height of the casters to assist in lining up the Core and the Bagwell mounting holes. 4. Install the new Backsplash panel using seven (7) screws.
  • Page 28 Non-Scale 2-Bag Bagwell Upgrade 5. If not already present, partially thread the two (2) upper screws on the Bagwell side of the Core. Leave approximately ¼ inch of the threads exposed. 6. Mate the new Bagwell to the Core by lifting the frame up and over the partially threaded screws.
  • Page 29 Non-Scale 2-Bag Bagwell Upgrade 7. Tighten the two (2) screws and install the two (2) lower screws that connect the Bagwell and the Core. 8. Install the upper rear screw attaching the Backsplash panel to the Core. Note: Adjust the leveling feet if the slot does not line up well.
  • Page 30 Non-Scale 2-Bag Bagwell Upgrade 9. Route the following cables through the cable access hole: Bagwell Cable Access Hole • AC Power In Cable Core Cable Access Hole • Local Area Network (LAN) Cable • AC Power Out Cables For more information, refer to Routing Cables on page 30.
  • Page 31 12. Attach the Bagwell Skirt Panels. For more information, refer to Installing Bagwell Skirt Panels on the next page. 13. Level the unit and attach the bag racks, if necessary. For more information, refer to the NCR Fastlane SelfServ™ Checkout (7358) Hardware Installation Guide (B005– 0000–5263).
  • Page 32 Non-Scale 2-Bag Bagwell Upgrade Installing Bagwell Skirt Panels To install Bagwell skirt panels, follow these steps: 1. On the side of the Bagwell, do the following: a. Attach the skirt panel to the skirt brackets by aligning the open slots in the skirt panel with the screw holes in the skirt bracket.
  • Page 33 Non-Scale 2-Bag Bagwell Upgrade 2. On the front and back of the Bagwell, do the following: Note: The front and back skirt panels of the Bagwell must be installed after the side skirt panel of the Bagwell. a. Attach the front and back skirt panels to the skirt brackets by aligning the open slots of both skirt panels with the screw holes in the skirt bracket.

  • Page 34: Routing Cables

    Non-Scale 2-Bag Bagwell Upgrade Routing Cables To route cables when installing a new Bagwell, follow these steps: Note: If a new Bagwell is installed to a No-Bag unit, refer to Routing Cables for No-Bag unit on page 32. 1. Route the Local Access Network (LAN) Cable from the Core to the Customer Interface through the smaller opening of the Bagwell frame, as shown in the image below.
  • Page 35 Non-Scale 2-Bag Bagwell Upgrade 2. Route the AC Power Out and AC Power In cables and then connect to the Power Strip, as shown in the image below.
  • Page 36 Non-Scale 2-Bag Bagwell Upgrade Routing Cables for No-Bag unit These are additional steps in routing cables when upgrading a No-Bag unit to a 2-Bag unit: 1. Detach the rear Core panel by removing six (6) screws to access the main cable bundle and Power Strip.
  • Page 37 Non-Scale 2-Bag Bagwell Upgrade 2. Unplug the AC Power Out and AC Power In cables from the Power Strip. AC Power In Cable will be reused in the new Bagwell. AC Power Out Cable should be routed either through the left-hand or right-hand lower Core access cutout into the new Bagwell.

This manual is also suitable for:

Fastlane selfserv 7358-k122Fastlane selfserv 7358-k145