Adjusting The Brightness Of Acopy (Brightness) - Sharp DX-C311 Operation Manual

ADJUSTING THE BRIGHTNESS OF A COPY (Brightness)
The brightness of color images can be adjusted.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
After placing the original, specify the original size.
☞
ORIGINAL SIZES
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Color Adjustments] key.
(3) Touch the [Brightness] key.
☞
[Color Adjustments] KEY
Color Adjustments
Brightness
3
-2
Press the [COLOR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned
4
and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
To cancel a brightness setting...
Touch the [Cancel] key in the screen of step 3.
Darker
(page 2-29)
(page 2-82)
(1) (2)
OK
Cancel OK
0 2
).
Original Brighter
Adjust the brightness.
(1) Adjust the brightness.
Touch the [+] key to make the image brighter, or the [-]
key to make the image darker.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-89
COPIER
Contents