Adjusting The Brightness Of Acopy (Brightness) - Sharp MX-3114N Operation Manual

ADJUSTING THE BRIGHTNESS OF A COPY (Brightness)
The brightness of colour images can be adjusted.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the
2
(3) Touch the [Colour Adjustments] key.
(4) Touch the [Brightness] key.
☞
[Colour Adjustments] KEY
Colour Adjustments
Brightness
3
-2
Press the [COLOUR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned
4
and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
To cancel a brightness setting...
Touch the [Cancel] key in the screen of step 3.
Darker Original
keys to switch through the screens.
(page 2-117)
(1) (2)
OK
Cancel OK
0 2
).
2-124
Brighter
Adjust the brightness.
(1) Adjust the brightness.
Touch the [+] key to make the image brighter, or the [-]
key to make the image darker.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
COPIER
Contents