Function Selection For Tax; Other Programming - Sharp XE-A302 Instruction Manual

Action when EJ memory area is full
• By default, when the memory for EJ becomes nearly full, the cash register shows "N" at the 14th position of
the display (EJ memory nearly full message), and the cash register keeps storing new data while erasing the
oldest data. When "0" is selected, the cash register will no longer show EJ memory nearly full message.
When "2" is selected, the cash register shows EJ memory nearly full message and when the memory is totally
full, the cash register locks the sales/data entry with a display of the memory full message "EJ DATA FULL".
You will only be able to issue an EJ report.

Function selection for tax

Job code: 15
* Item:
A Always enter 0.
B Always enter 0.
C Always enter 0.
D Always enter 0.
E Always enter 0.
F Always enter 0.
G Tax delete in REG mode availability
H Manual tax entry in
REG mode availability

Other programming

Job code: 61
* Item:
A Always enter 0.
B Always enter 0.
C Minus dept. and PLU/subdept. availability Disallow to program minus dept. and PLU/subdept. 0
D Fractional treatment
:
E Use of key
F Time format
G Date format
H Position of decimal point (from right) (TAB)
Selection:
(Fixed position)
(Fixed position)
(Fixed position)
(Fixed position)
(Fixed position)
(Fixed position)
Allow tax delete in REG mode*
Disallow it
Allow manual tax entry in REG mode*
Disallow it
Selection:
(Fixed position)
(Fixed position)
Allow it*
Round off (4 down, 5 up)*
Raising to unit
Disregarding fractional treatment
:
Use key as 00 key*
:
Use key as 000 key
Use 12-hour format*
Use 24-hour format
Use month-day-year format*
Use day-month-year format
Use year-month-day format
Entry:
0
0
0
0
0
0
0
1
0
1
Entry:
0
0
1
0
1
2
0
1
0
1
0
1
2
0 to 3 (default 2)
51