Clocks; Setting An Alarm; Deleting An Alarm; Using The Stopwatch - Garmin VIVOACTIVE 5 Owner's Manual

Setting an Alarm

You can set multiple alarms. You can set each alarm to occur once or to repeat regularly.
1 Hold .
2 Select Clocks > Alarms > Add Alarm.
3 Enter a time.
4 Select the alarm.
5 Select Repeat, and select an option.
6 Select Label, and select a description for the alarm.

Deleting an Alarm

1 Hold .
2 Select Clocks > Alarms.
3 Select an alarm, and select Delete.

Using the Stopwatch

1 Hold .
2 Select Clocks > Stopwatch.
3 Press to start the timer.
4 Press to restart the lap timer.
The total stopwatch time continues running.
5 Press to stop the timer.
6 Select an option:
• To reset the timer, swipe down.
• To save the stopwatch time as an activity, swipe up, and select Save.
• To review the lap timers, swipe up, and select Review Laps.
• To exit the stopwatch, swipe up, and select Done.

Starting the Countdown Timer

1 Hold .
2 Select Clocks > Timer.
3 Enter the time, and select
4 Press .

Syncing the Time with GPS

Each time you turn on the watch and acquire satellites, the watch automatically detects your time zones and the
current time of day. You can also manually sync the time with GPS when you change time zones and to update
for daylight saving time.
1 Hold .
2 Select Clocks > Time > Time Sync.
3 Wait while the watch locates satellites

Clocks

Clocks
.
(Acquiring Satellite Signals, page 69).
61