Specifications - Sharp HT-SB500 Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
speaker. There may be some deviations from these values in
individual speaker.
General
Power source DC IN 12V
(AC 100 - 240 V ~ 50/60 Hz)
Power Power on: 14 W
consumption
Output power RMS: Total 32 watts
RMS:
Front Left/Right:
5 watts per channel into 12 ohms at 1kHz,
10% total harmonic distortion
Center:
7 watts per channel into 6 ohms at 1 kHz,
10% total harmonic distortion
Subwoofer:
15 watts per channel into 3 ohms at 100 Hz,
10% total harmonic distortion
FTC:
Front Left/Right:
Minimum 4 watts per channel into 12 ohms
at 200 Hz to 20 kHz, 10% total harmonic
distortion
Center:
Minimum 6 watts per channel into 6 ohms
at 1 KHz, 10% total harmonic distortion
Subwoofer:
Minimum 14 watts per channel into 3 ohms
at 100 Hz, 10% total harmonic distortion
4A: AC/DC adaptor
Speaker 3.1-way Speaker System
Front speakers: 1-9/16" (40 mm) Full Range
(x 2)
Impedance: 12 ohms / Channel
Centre Speaker: 1-9/16" (40 mm) Full
Range (x 2)
Impedance: 6 ohms
(12 ohms x 2 parallel connections)
Subwoofer: 2-1/4" (57 mm) Woofer (x4)
Impedance: 3 ohms
(12 ohms x 4 parallel connections)
Audio output Subwoofer Pre Out: 10 kohms
terminals
Input terminals Analogue input (LINE 1):
RCA type x 1pair (L/R)
500 mV / 47 kohms
Analogue input (LINE 2):
Stereo mini jack Ø 3.5 mm
100 mV / 47 kohms
Coaxial digital input (DIGITAL 1):
RCA type x 1
Optical digital input (DIGITAL 2):
Square type x 1
Dimensions Width: 38-3/4" (985 mm)
Height: 3-3/4" (96 mm)
Depth: 2-3/4" (70 mm)
Weight 4.84 lbs. (2.2 kg)
HT-SB500
25