Specifications - Sharp HT-SB200 Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
speaker. There may be some deviations from these values in
individual speaker.
General
Power source DC IN 12V
(AC 100 - 240 V ~ 50/60 Hz)
Power Power on: 10 W
consumption Power stand-by: 0.6 W (*)
Output power Front speaker:
RMS: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Subwoofer:
RMS: 20 W (10% T.H.D.)
RMS: 13 W (0.9% T.H.D.)
Speaker 2.1-way Speaker System
Front Speakers: 38 mm (1-1/2") Full Range
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Audio output Speakers: 12 ohms / Channel
terminals Subwoofer: 3 ohms
(12 Ohms x 4 parallel connections)
Input terminals Analogue input (LINE 1):
RCA type x 1pair (L/R)
500 mV / 47 kohms
Analogue input (LINE 2):
Stereo mini socket Ø 3.5 mm
100 mV / 47 kohms
4A: AC/DC adaptor
Dimensions Width: 800 mm (31-1/2")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight 1.75 kg (3.86 lbs.)
(*) This power consumption value is obtained when in the
power stand-by mode.
HT-SB200
ENGLISH
E-16