Monitoring Options - Samsung SMARTCAM SNH-P6410W User Manual

Monitoring options

Item
Default Camera Set the default camera to monitor in the camera list.
Delete Camera Delete the registered camera.
Cancel remembering
Cancel remembering the camera password.
camera password
If Night Vision is set <ON>, it will automatically switch to black
and white mode in the dark condition and then the IR lamp will
Night Vision automatically operate.
If Night Vision is set <OFF>, it does not switch to night vision mode
and it will operate in color mode.
20 · English
Description
Item
A dark spot will be brighter and a bright spot will be darker to
WDR
compensate for the backlight.
Motion zone setting It detects motion within the range set by a user.
Flip You can flip over the video image.
A user can directly save videos in their SD card.
`
30 minute long video is saved.
Manual recording `
If there is an ongoing event now or overwrite to SD card is not
checked, and there is storage space of 10% remaining, you
cannot perform manual recording.
Set the network speed (low/mid/high).
`
If the bandwidth provided by your internet service provider is
Network Speed
smaller than the recommended value, then the video might get
fuzzy or temporary disconnections or delays in the live video may
be caused.
Capture Image Live video is saved as one image.
When enabled, you can hear what's happening around the camera.
`
Sound
Some internet service providers do not support audio outputs in
relay mode.
Brightness You can adjust the brightness of the screen image.
Hide/unhide detailed
Click on the [ ] icon to unhide or hide detailed setting menu.
menu
Adjust the volume of the built-in microphone and speaker of the
camera as appropriate.
If you set the mic setting to '0', you will not hear the live audio, and it
Audio
will not be recorded in your SD card.
Note that the Two-way audio transfer function is available only with the
smart phone application.
Description