Unlatching The Seat; Changing The Seat Suspension; During Operation; During Operation Safety - Toro 72028 Operator's Manual

Riding mower with 60in turbo force rear discharge mower
Hide thumbs Also See for 72028:
Table of Contents

Advertisement

Unlatching the Seat

To unlatch the seat, push the seat latch forward
(Figure
12).
Figure 12
1. Seat latch
Changing the Seat
Suspension
The seat is adjustable to provide a smooth and
comfortable ride. Position the seat where you are
most comfortable.
To adjust it, turn the knob in front either direction to
provide the best comfort
Figure 13
1. Seat-suspension knob
2. Seat
(Figure
13).

During Operation

During Operation Safety

General Safety
The owner/operator can prevent and is responsible
for accidents that may cause personal injury or
property damage.
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
g008956
Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.
Contacting the blade can result in serious personal
injury. Shut off the engine, remove the key, and
wait for all moving parts to stop before leaving the
operating position. When you turn the key to the
OFF position, the engine should shut off and the
blade should stop. If not, stop using your machine
immediately and contact an Authorized Service
Dealer.
Operate the machine only in good visibility and
appropriate weather conditions. Do not operate
the machine when there is the risk of lightning.
Keep your hands and feet away from the cutting
units. Keep clear of the discharge opening.
Do not mow with the discharge deflector
raised, removed, or altered unless there is a
grass-collection system or mulch kit in place and
working properly.
Do not mow in reverse unless it is absolutely
necessary. Always look down and behind you
before moving the machine in reverse.
Use extreme care when approaching blind
corners, shrubs, trees, or other objects that may
block your view.
Stop the blades whenever you are not mowing.
g019768
If the machine strikes an object or starts to vibrate,
immediately shut off the engine, remove the key
(if equipped), and wait for all moving parts to stop
before examining the machine for damage. Make
all necessary repairs before resuming operation.
Slow down and use caution when making turns
and crossing roads and sidewalks with the
machine. Always yield the right-of-way.
Before you leave the operating position, do the
following:
– Park the machine on a level surface.
– Disengage the power takeoff and lower the
attachments.
– Engage the parking brake.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master professional 7500-d series72065

Table of Contents