Positioning The Seat; Unlatching The Seat; Pushing The Machine By Hand - Toro Z Master 74250 Operator's Manual

With 60in turbo force side discharge mower
Table of Contents

Advertisement

Position C
This is the full open position. The suggested use for this
position is as follows.
Use in tall, dense grass mowing conditions.
Use in wet conditions.
Lowers the engine power consumption.
Allows increased ground speed in heavy conditions.
This position is similar to the benefits of the Toro SFS
mower.
Full Forward Position
Figure 24

Positioning the Seat

The seat can move forward and backward. Position the
seat where you have the best control of the machine and
are most comfortable.
1. To adjust, move the lever sideways to unlock the seat
(Fig. 25).
2. Slide the seat to the desired position and release the
lever to lock it in position.
m–6827
26
1
Figure 25
1. Adjustment lever

Unlatching the Seat

Push the seat latch rearward to unlatch the seat. This will
allow access to the machine under the seat.
2
1
Figure 26
1. Seat latch
2. Gas cap

Pushing the Machine by Hand

Important
Always push the machine by hand. Never
tow the machine because hydraulic damage may occur.
To Push the Machine
1. Disengage the power take off (PTO) and turn the
ignition key to Off. Move the levers to the neutral
locked position and apply the parking brake.
m–3655
3
m–6840
3. Seat

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master z587l

Table of Contents