Connections and controls........................26 Operating..............................29 7.1 Starting the device........................... 29 7.2 Main menu............................29 7.3 Menu overview..........................36 7.4 Functions in 2-channel DMX mode................... 37 7.5 Functions in 4-channel DMX mode................... 37 Street Bar IP65 16x3W TW LED bar...
Page 4
Table of contents 7.6 Functions in 6-channel DMX mode................... 38 7.7 Functions in 16-channel DMX mode..................41 Technical specifications........................43 Plug and connection assignment....................46 Troubleshooting............................47 Cleaning............................... 49 Protecting the environment......................50 Street Bar IP65 16x3W TW LED bar...
Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. Street Bar IP65 16x3W TW LED bar...
Our online guides provide detailed information on technical basics Online guides and terms. Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will Service gladly assist you. Street Bar IP65 16x3W TW LED bar...
Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Street Bar IP65 16x3W TW LED bar...
Page 9
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – high-voltage. Warning – hot surface. Street Bar IP65 16x3W TW LED bar...
Page 10
General information Warning signs Type of danger Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone. Street Bar IP65 16x3W TW LED bar...
Extend the life of the device by regular breaks in operation and avoid switching it on and off frequently. This device is not suitable for continuous use. Street Bar IP65 16x3W TW LED bar...
Page 12
Electric shock caused by short-circuit Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician. Street Bar IP65 16x3W TW LED bar...
Page 13
There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. WARNING! Eye damage caused by high light intensity Never look directly into the light source. Street Bar IP65 16x3W TW LED bar...
Page 14
15 minutes. NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. Street Bar IP65 16x3W TW LED bar...
Page 15
Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire. Street Bar IP65 16x3W TW LED bar...
For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness. Street Bar IP65 16x3W TW LED bar...
Page 17
(resistance to changing ambient conditions as well as against the effects of sun‐ light and UV rays). The seals and screw connections of the equipment must be checked regularly to ensure a fault-free operation. In cases of doubt, consult a specialist workshop in due time. Street Bar IP65 16x3W TW LED bar...
Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. Street Bar IP65 16x3W TW LED bar...
Page 19
When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand. Street Bar IP65 16x3W TW LED bar...
Page 20
Possible damage due to moisture Moisture entering into open connectors (plugs and couplers) of DMX or power cords can cause short circuits. Close unused connectors with end caps intended for this purpose (www.thomann.de). Street Bar IP65 16x3W TW LED bar...
Page 21
Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off. The safety cable must be attached to the bracket. Please note that this device must not be connected to a dimmer. Street Bar IP65 16x3W TW LED bar...
Page 22
Insert the plug completely and straight into the coupling. Make sure that the flexible sealing ring has complete contact. Turn the union nut straight onto the thread of the coupling. Hand-tighten the union nut. Street Bar IP65 16x3W TW LED bar...
Starting up Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Street Bar IP65 16x3W TW LED bar...
Page 24
Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W). Street Bar IP65 16x3W TW LED bar...
Page 25
Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on. Street Bar IP65 16x3W TW LED bar...
Connections and controls Connections and controls Street Bar IP65 16x3W TW LED bar...
Page 27
Mains cable for the power supply of the device 3 [DMX IN] DMX input 4 Pressure compensation element 5 [DMX OUT] DMX output 6 [POWER OUT] Power cord for the voltage supply of a connected device 7 Display Street Bar IP65 16x3W TW LED bar...
Page 28
Selects an option of the respective operating mode. 11 [UP] Navigates upwards in a menu list. Increases the displayed value by one. 12 [DOWN] Navigates downwards in a menu list. Decreases the displayed value by one. Street Bar IP65 16x3W TW LED bar...
If you don't press any button for about 20 seconds, the current setting will be automatically applied and the display turns off. The set values are retained as long as the device is connected to the mains power supply. Street Bar IP65 16x3W TW LED bar...
Page 30
[DOWN] you can now select a value between ‘Fd.00’ (no fading) and ‘Fd.99’ (fast fading). Wait about 20 seconds until the display turns dark. Then the settings have been applied. To return to the parent menu without making changes, press [MODE]. Street Bar IP65 16x3W TW LED bar...
Page 31
[DOWN] you can now select a value between ‘Fd.00’ (no fading) and ‘Fd.99’ (slow transition). Wait about 20 seconds until the display turns dark. Then the settings have been applied. To return to the parent menu without making changes, press [MODE]. Street Bar IP65 16x3W TW LED bar...
Page 32
[DOWN] to select a value between 0 (low sensitivity) and 31 (high sensitivity), the display shows ‘SU.00’ … ‘SU.31’ . Wait about 20 seconds until the display turns dark. Then the settings have been applied. To return to the parent menu without making changes, press [MODE]. Street Bar IP65 16x3W TW LED bar...
Page 33
Highest possible DMX address 2-channel 4-channel 6-channel 16-channel Wait about 20 seconds until the display turns dark. Then the settings have been applied. To return to the parent menu without making changes, press [MODE]. Street Bar IP65 16x3W TW LED bar...
Page 34
Press [MODE] repeatedly until the display shows ‘SLAv’ . Wait about 20 seconds until the display turns dark. Then the settings have been applied. To return to the parent menu without making changes, press [MODE]. Street Bar IP65 16x3W TW LED bar...
Page 35
[UP] and [DOWN] you can now select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast). Wait about 20 seconds until the display turns dark. Then the settings have been applied. To return to the parent menu without making changes, press [MODE]. Street Bar IP65 16x3W TW LED bar...
Intensity cold white 7.5 Functions in 4-channel DMX mode Channel Value Function 0 … 255 Dimmer function 0 … 255 Intensity warm white 0 … 255 Intensity cold white 0 … 255 Strobe speed Street Bar IP65 16x3W TW LED bar...
Intensity (0 % to 100 %) warm white 5 Segment 0 … 255 Intensity (0 % to 100 %) cold white 5 Segment 0 … 255 Intensity (0 % to 100 %) warm white 6 Segment Street Bar IP65 16x3W TW LED bar...
Page 42
Intensity (0 % to 100 %) cold white 7 Segment 0 … 255 Intensity (0 % to 100 %) warm white 8 Segment 0 … 255 Intensity (0 % to 100 %) cold white 8 Segment Street Bar IP65 16x3W TW LED bar...
IP65 connector to safety plug) DMX control DMX cable with IP65 XLR plug, 3- pin (incl. adapter to XLR 3-pin male) Output connections Voltage supply Power cable with IP65 screw con‐ nector Street Bar IP65 16x3W TW LED bar...
Page 44
Mounting options hanging, standing Dimensions (W × H × D) 1050 mm × 145 mm × 145 mm Weight 5.5 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 50 %, non-condensing Street Bar IP65 16x3W TW LED bar...
Page 45
Technical specifications Further information Outdoor-ready Colour mixture CW / WW LED type x-in-1 Fanless Remote control Not possible Wireless DMX LEDs individually controllable Housing Aluminium, black Street Bar IP65 16x3W TW LED bar...
A three-pole coupling in IP65 design is used as DMX output, a three-pole plug in IP65 design is used as DMX input. The drawing below and the table show the pin assignment of a matching coupling. Assignment Ground (shielding) Signal inverted (DMX–, ‘cold’) Signal (DMX+, ‘hot’) Street Bar IP65 16x3W TW LED bar...
Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: Street Bar IP65 16x3W TW LED bar...
Page 48
DMX interface circuit. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. Street Bar IP65 16x3W TW LED bar...
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. Street Bar IP65 16x3W TW LED bar...