Set Time Alarm; Activate/Deactivate Time Alarm - La Crosse Technology C87214 Faq

 Look for heat sources such as sunlight, door or window frames or reflected heat or cold
near the weather station.
Check
batteries and AC power

Set Time Alarm

In normal mode, hold the ALARM button for three seconds to enter alarm set mode.
1. HOUR: The Hour will flash, use the ▲ or ▼ buttons to set the hour, and press ALARM
button to confirm and switch to minutes.
2. MINUTES: The Minutes will flash, use the ▲ or ▼ buttons to set the minutes, and press
ALARM button to confirm and exit.
Note: When no buttons are pressed for ten seconds, the weather station will save the last
change and default back to normal mode

Activate/Deactivate time alarm

 In normal mode, press and release the ALARM button once to show alarm time.
 Press and release the ALARM button repeatedly to turn ON/OFF alarm.
 The alarm icon
 Note: The alarm will ring for 2 minutes then turn off if no buttons are pressed.
Snooze Alarm
 When the alarm sounds, press the HI/LOW/OFF button to snooze the alarm for 10
minutes.
 The snooze option can repeat three times.
 The alarm icon
 Note: while the alarm sounds press any button except the ALARM button to turn the
alarm off.
Manually Set Time/Date: Program Menu
The TIME SET button will move through the program menu.
•
• To change a value use the ▲ and ▼ buttons.
1. Hold the TIME SET button five seconds. BEEP and the word ON will show. Press and
release the ▲ and ▼ buttons to turn this to OFF the beep when a button is pressed.
Confirm with the TIME SET button and move to ATOMIC ON/OFF.
2. ATOMIC and the word ON will show. Press and release the ▲ and ▼ buttons to turn this
3. OFF if you do not wish atomic time reception. Confirm with the TIME SET button and
move to time zone.
4. TIME ZONE and EST will show. Press and release the ▲ and ▼ buttons to select a
different Time Zone:
• AST=Atlantic
EST= Eastern
•
CST= Central
•
MST= Mountain
•
PST= Pacific
•
AKT= Alaska
•
HAT=Hawaiian.
•
5. Confirm with the TIME SET button and move to DST.
6. DST ON will show. Press and release the ▲ and ▼ buttons to turn this to OFF if you do
not observe DST. Confirm with the TIME SET button and move to 12/24 hour time.
7. 12H will show. Press and release the ▲ and ▼ buttons to select 24H. Confirm with the
La Crosse Technology, Ltd.
cord.
appears when alarm is active.
will flash while the snooze feature is active.
www.lacrossetechnology.com/support Page 11