Arm/Disarm Temperature Alerts; Temperature Alert Sounds; Time Alarm Set; Deactivate Alarm - La Crosse Technology 308-1425CA Instruction Manual

REMOTE HIGH alert will flash. Press the ▼ or ▲buttons to set the alert value and press the ALERT

button to confirm and move to the REMOTE LOW setting.
REMOTE LOW alert will flash. Press the ▼ or ▲buttons to set the alert value and press the ALERT

button to confirm and move to the INDOOR HIGH setting.
INDOOR HIGH alert will flash. Press the ▼ or ▲buttons to set the alert value and press the ALERT

button to confirm and move to the INDOOR LOW setting.
INDOOR LOW alert will flash. Press the ▼ or ▲buttons to choose the value and press the ALERT

button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn individual alerts ON or OFF.
In normal time mode, press and release the ALERT button to toggle between:

Remote HI
o
Remote Lo
o
Indoor HI
o
Indoor LO
o
Press the ▲button to arm the selected alert.

The alert bell appears when each alarm is activated.

Press the ▼button to disarm the selected alert.

OFF will show in the Alerts area if no alert is active.

When temperature alert sounds, the corresponding alert bell will flash.

The alert beeps once every minute, until the temperature is out of alert range.

Press any button to stop alert. The alert bell will still show.

Disarm Alert: In normal mode, press and release the ALERT button to select the alert to disarm.

With HI or LO alert selected, press the ▼button disarm alert.
Hold the ALARM button for 2 seconds to enter the alarm time set mode.
1. The alarm hour digit will flash in the time display.
2. Press and release the ▼ or ▲ buttons to select the hour.
3. Press and release the ALARM button to set the minutes. The minute digits will
flash.
4. Press and release the ▼ or ▲ buttons to select the minutes.
5. Confirm with the ALARM button and exit.
6. The bell icon will show indicating the alarm is active.
7. The bell icon will flash when the alarm is sounding.
1. Press and release the ALARM button once to show alarm time.
2. Press and release the ALARM button to activate or deactivate the Alarm.
3. The bell icon will disappear indicating the alarm is no longer active.
Model: 308-1425CA

Arm/Disarm Temperature Alerts

Temperature Alert Sounds

Time Alarm Set

Deactivate Alarm

https://www.lacrossetechnology.com/308-1425ca Page | 8