Personal Protective Equipment; Obligations Of The Machine End-User - Bosch Rexroth II 3G Manual

Directional seat valves, direct operated, with solenoid actuation
Table of Contents

Advertisement

14/48
Safety instructions
Bosch Rexroth AG, M-.SED 6...XN..., RE 22049-XN-B/05.17

2.8 Personal protective equipment

The machine end-user must provide the personal protective equipment (such as
gloves, working shoes, safety goggles, working clothes, etc...).

2.9 Obligations of the machine end-user

The machine end-user is obliged to check in the order confirmation whether the
supplied valve complies with the required category and the corresponding zone.
The machine end-user of the Bosch Rexroth valve is responsible that
• the valve is only used according to the intended use as defined in these operating
instructions.
• the valve is only stored, operated and maintained according to the technical data,
operating and environmental conditions indicated in "Data sheet 22049-XN", in
particular that the limit values indicated in "Data sheet 22049-XN" are not exceeded.
• the applicable provisions, regulations and directives on explosion protection are
complied with.
• the operating personnel are instructed at regular intervals.
• a danger zone is marked, if required.
• the safety measures for their specific area of application of the valve are
complied with.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rexroth ii 3d

Table of Contents