World Time; Checking World Time; Setting The World Time City - Casio 3536 Operation Manual

Table of Contents

Advertisement

Switching between 12-hour and 24-
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least one second.
Release the button when the seconds
start to flash.
Seconds
3.
Press (C) five times.
This causes [12H] or [24H] to flash on the
display.
4.
Press (D) to toggle the setting between
[12H] (12-hour timekeeping) and [24H]
(24-hour timekeeping).
[P] is displayed during p.m. times while
12-hour timekeeping is being used.
12-hour timekeeping
24-hour timekeeping
5.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 3536
World Time lets you look up the current time
in any one of 48 cities (29 time zones) around
the globe.

Checking World Time

1.
Enter the World Time Mode.
Navigating Between Modes
l
Entering the World Time Mode displays
the city code of the currently selected
World Time city.
For information about city codes, see
the information below.
City Table
l

World Time

City code

Setting the World Time City

Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Press (D) to display the city code of the
currently selected city.
Holding down (D) scrolls through
settings at high speed.
For information about city codes, see
the information below.
City Table
l
City code
3.
If you want to configure the summer time
setting, hold down (A) for at least one
second.
[DST] is displayed along with summer
time.
Each time you hold down (A) for at least
one second, the setting will toggle
between standard time and summer
time.
Note
The summer time setting you configure
is applied to the currently selected city
only. It does not affect other cities.
8

Advertisement

Table of Contents
loading

Table of Contents