Asus Maximus V Formula Manual page 107

DRAM Power Phase control [Auto]
[Auto] Allows you to set the default DRAM power phase control settings.
[Optimized] Allows you to set ASUS optimized phase tuning profile.
[Extreme] Allows you to set the Full phase mode.
DRAM Power Thermal Control [110]
A higher temperature brings a wider DRAM power thermal range, and extends the
overclocking tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to
adjust the value. The values range from 110 to 131.
DO NOT remove the thermal module. The thermal conditions must be monitored.
VCCIO
The sub-items in this menu allow you to set the VCCIO settings.
VCCIO Switching Freq [Auto]
Allows you to switch the VCCIO frequency
Configuration options: [Auto] [1X] [1.65X]
VCCIO Full Phase Control [Enabled]
Allows you to enable or disable the VCCIO Full Phase Control.
Configuration options: [Auto] [Disabled] [Enabled]
VCCIO Over-Current Protection [Enabled]
Allows you to enable or disable the VCCIO Over-Current Protection.
Configuration options: [Disabled] [Enabled]
Extreme OV [Disabled]
This item is set to [Disabled] by default to protect the CPU from being overheated. Set this
item to [Enabled] to choose a higher voltage to overclock, but doing so might decrease CPU
life.
Configuration options: [Disabled] [Enabled]
CPU Voltage [Offset Mode]
[Manual Mode] Allows you to set a fixed CPU voltage.
[Offset Mode] Allows you to set the Offset voltage.
ASUS MAXIMUS V FORMULA Series
3-15