Training clerk specification for training mode
For the details of clerk training, please refer to "TRAINING MODE" on
Key operation example
AUTO key programming — Automatic sequencing key
If you program frequently performed transactions or report sequences for the
transactions and/or reports simply by pressing the
Programming for
Key operation example
AUTO
setting
When the
must be in the appropriate position (REG, MGR, OPX/Z, X1/Z1 or X2/Z2).
4
Reading Stored Programs
The machine allows you to read every program stored in the PGM mode.
Key sequence for reading stored program
Report name
Programming report 1
Programming report 2
Auto key programming report
Printer density programming report
PLU programming report
To stop reading PLU programming report, turn the mode switch to the MGR position.
54
86
20
Delete
Transaction
max. 25 times
; entering a PLU 2 item (programmed unit price: 1.50) and a dept. 6 item (unit price: 1.00)
2
100
key has been programmed to execute a report job function etc., the mode switch
page
To cancel
Clerk code
(1 to 20)
key in key operations.
Key sequence
Start PLU code
56.
Print
key, you can call those
Print
End PLU code