Sharp MX2300N User Manual page 564

Ready to send.
Scan Send
Fax
Mode Switch
Auto
8 x11 1 / 2
Image
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
Speaker Resend
Address Book
Sub Address
Special Modes
File
Transmission begins
When transmission ends, image settings and convenient function (special mode) settings are cleared.
To cancel scanning...
Press the [STOP] key (
Select convenient special modes
Speaker Resend
Address Book
Sub Address
Special Modes
File
Quick File
Enter the destination fax number
Begin transmission
).
Touch the [Special Modes] key to select special modes such
as timer transmission and the erase function.
Touch the [File] key or [Quick File] key to select the document
filing function.
• [Address Book] key: Select a destination that is stored in the
• key: Use a search number to specify a destination
stored in the Address Book.
☞
USING A SEARCH NUMBER TO CALL UP
A DESTINATION
• [Resend] key: Select a fax number from the last eight
destinations used for transmission.
☞
TRANSMISSION BY REDIALING
(RESEND)
• Numeric keys: Enter a fax number.
☞
Scan the original and send the fax.
If the original is placed on the document glass, follow these
steps to start scanning and transmission:
When sending a fax normally (memory transmission)
(1) Press the [BLACK & WHITE START] key (
(2) When scanning is finished, replace the original with the
next original.
(3) Press the [BLACK & WHITE START] key (
(4) Repeat steps (2) and (3) until all originals have been scanned.
(5) Touch the [Read-End] key.
When sending a fax in direct transmission mode
Multiple originals cannot be scanned in direct transmission mode.
Press the [BLACK & WHITE START] key (
12
Address Book or look up a destination
in a global address book.
☞
CALLING UP A STORED
DESTINATION (page 37)
(page 43)
(page 25)
ENTERING A FAX NUMBER WITH THE
NUMERIC KEYS (page 35)
) and start transmission.
).
).