Erasing Peripheral Shadows On The Image (Erase) - Sharp MX2300N User Manual

ERASING PERIPHERAL SHADOWS ON THE
IMAGE (Erase)
The erase function is used to erase shadow lines on images produced when scanning thick originals or books on the
document glass. (This function erases the parts of the image where shadows tend to form. The function does not detect
shadows and erase only the shadows.)
Scanning a thick book
Shadows appear here
Erase modes
Edge erase
• Shadows at the edges of the original can also be erased when the automatic document feeder is used.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Mode Switch
Image
Internet Fax
Settings
Send Settings
2
USB Mem. Scan
(1)
Scan Fax
PC Scan Data Entry
(2)
Not using the erase
Shadows appear in the
image.
Center erase
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Select the mode that you wish to use.
Address Book
(1) Touch the [Mode Switch] key.
Address Entry
Special Modes (2) Touch the key of the mode that you wish to
File
use.
Quick File
88
function
No shadows appear.
Edge + Center erase
Using the erase
function