Sharp HT-DD5000 Operation Manual page 5

(Continued)
Black
Black (with white line)
Black (with Black
white line)
Surround speaker
(Right)
Black
Black (with white line)
Black (with white line) Black
Caution:
Do not reverse the right channel and left channel wires
when connecting the speakers to the unit.
Do not let bare speaker wires touch each other, as this
may damage the amplifier and/or speakers.
Sub woofer
Connect the sub woofer wire to the SUB WOOFER terminals
as shown.
Use a speaker with an impedance of 8 ohms or more, as a
lower impedance speaker can damage the unit.
Surround speakers
Connect each surround speaker wire to the SURROUND
Surround speaker
SPEAKER terminals as shown.
(Left)
Black
Use speakers with an impedance of 8 ohms or more, as
lower impedance speakers can damage the unit.
Note:
4
HT-DD5000(SEC) TINSE0009SJZZ
Connect the black wire with the white line to the negative
(–) terminal, and the black wire to the positive (+) termi-
nal.
Connect the black wire with the white line to the negative
(–) terminal, and the black wire to the positive (+) termi-
nal.
Do not allow any objects to fall into or to be placed in
the bass reflex openings.
Do not stand or sit on the speakers. If the speakers fall
or collapse, you may be injured.
The speaker grilles are not removable.