Sharp HT-DD5000 Operation Manual page 20

(Continued)
X W
SET UP
DIGITAL
1
DIGITAL
2
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
3
Test tone
You can check (and adjust) the speaker level by listening to
the sound output from each speaker individually, while stand-
ing at the actual listening position in the room.
The speaker level can be adjusted using the remote control.
1
Press the MENU button repeatedly to make "TEST" ap-
pear.
MENU
2
Within 10 seconds, press the ITEM button.
The test tone will be heard from each speaker, in order,
ITEM
at about 5 second intervals.
Note:
While
displayed.
If
L-FRNT
CENTER
R-FRNT
R-SURR
L-SURR
S-WOOFER
When the test tone is being output, the indicator for that
speaker will flash.
The test tone will be heard until the current menu selec-
tion is changed by pressing the MENU button again, or
by selecting some other function.
3
To adjust the speaker level while the test tone is being
X
output from a particular speaker, press the SET UP (
or ) button.
The speaker level can be adjusted within a range of
+10dB to -10dB, in 1dB steps.
Notes:
If "NO" is selected for any individual speaker's size setting
(page 16), the test tone will not be heard from that
speaker.
Please note that the front left and front right speaker lev-
els cannot be adjusted using this method.
When a surround test is performed while
lit, "R-SURR" and "L-SURR" will be displayed and can
be adjusted. However, if
will be displayed, and both channels will be adjusted at
the same time.
19
HT-DD5000(SEC) TINSE0009SJZZ
DIGITAL is lit, "R-SURR" and "L-SURR" will be
DIGITAL is not lit, "SURR" will be displayed.
DIGITAL is not lit, "SURR"
W
DIGITAL is