Initial Operation; Setting Up The Device; Connect Power Supply - Philips PPX4010/INT User Manual

3 Initial Operation

Setting up the Device

You can find on the market a standard tripod for to ele-
vate the device.
1 Connect one or two USB plug depending on your
needs to a computer to switch on the device.
2 Turn the device towards a suitable projection sur-
face or wall. Note that the distance to the projection
surface must be a minimum of 0.5 meter and a max-
imum of 5 meters. Make sure the projector is in a
secure position.
3 Use the focus wheel on the top to adjust the image
sharpness.
6

Connect Power Supply

CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of the
power supply matches the mains voltage avail-
able at the setup location.
1 Connect the USB plug to the power adapter (not
included), we recommend using the accessory
PPA6200.
Philips · PPX 4010