Removing The Front Bezel - Lenovo IdeaCentre Q700 Hardware Maintenance Manual

Removing the front bezel

To remove the front bezel:
1. Remove the computer cover. Refer to "Removing the computer cover".
2. Remove the front bezel by releasing the four plastic tabs inside the
chassis and push the bezel outward as shown.
3. To reinstall the bezel, align the plastic tabs on the bottom of the bezel
with the corresponding holes in the chassis, and then snap them into
position at the bottom and top of the chassis.
4. Install the computer cover. Refer to "Completing the installation".
Chapter 7. Replacing hardware
31