Step 4.
Remove the two screws that secures the cover, slide the computer cover outward as shown.
Step 5.
Reinstall the computer cover:
a.
Align the cover with the guide track on the computer case, then slide the cover in.
b.
Secure the computer cover with the two screws.
Removing the front bezel
Note: For this procedure, it helps to lay the computer flat.
To remove the front bezel:
Step 1.
Remove the computer cover. Refer to "Removing the computer cover".
Step 2.
Remove the front bezel by releasing the three plastic tabs as shown.
Step 3.
To reattach the bezel, align the plastic tabs with the corresponding holes in the chassis, and
then snap it into position.
Step 4.
Reattach the computer cover.
2
.
Chapter 8
Replacing hardware
29