Hardware Maintenance Manual
Replacing the optical disk drive
34
To replace the optical disk drive:
1. Remove the computer cover. Refer to "Removing the computer cover".
2. Remove the front bezel. Refer to "Removing the front bezel".
3. Remove the screw
4. Slide the optical disk drive
2
5. Slide the new optical disk drive into the chassis.
6. Screw the optical drive back into the chassis.
7. Install the front bezel. Refer to the step 3 of the "Removing the front
bezel" section.
8. Install the computer cover. Refer to "Completing the installation".
that secures the optical drive on the chassis.
out of the chassis.
1