Maintenance & Servicing (cont.)
Fig. 1. Swing door louver grill screw location.
Fig. 3. Never brush across the coil fins.
Fig. 5. Remove condenser base bolts.
Fig. 7. Carefully slide the condensing unit back into position and reinstall the bolts.
TEC_TM_076 | REV. C | EN
TGN Refrigerators & Freezers
Fig. 2. Carefully remove the grill.
Fig. 4. Verify all blockages have been removed.
Fig. 6. Carefully slide the condensing unit out.
07/25/2023
truemfg.com
Page 27 of 32