Geo-Fence - PATHFINDER PT10U Owner's Manual

GEO-FENCE

A Geo-fence can be created for a specified area and will be displayed on
the Map tab. The dog alerts for the Geo-fence are turned on by default and
a notification will appear when a dog exits or enters the Geo-fence. The
notification will blink the 'Collar Icon' and app screen, or on the home or lock
screen.
• The Geo-fence alerts can be turned on and off in the Settings.
Geo-fence Info
The info button displays more information on setting up the Geo-fence.
Saving a Geo-fence
Long press the map to create a Geo-fence point. The Geo-fence points must
be created in a clockwise order and cannot intersect. A valid Geo-fence will
be displayed in green, while an invalid Geo-fence will be displayed in red and
cannot be saved.
Once a valid Geo-fence is created, use the save button to save the Geo-fence
on the map. The Geo-fence points can be edited before saving by holding and
dragging the points to edit its location.
Multiplex Geo-fence
You can create up to 10 Geo-fences, but they cannot intersect or overlap each
other. The overlapped Geo-fences will be displayed in red.
You may create a name for each Geo-fence, which will be used for the fence
alarm as well.
Remove a Geo-fence
In the Geo-fence setup window, you may delete the Geo-fence by tapping the
center of the fence.
73