Button Function - PATHFINDER PT10U Owner's Manual

2. BUTTON FUNCTION

* The GPS Collar pairing mode is used to pair the GPS receiver and the GPS
connector. The PATHFINDER set comes with both parts paired to each
other.
12
GPS Connector (PT10U)
The Select button is used to turn the
connector on/off and select a device to
pair. While turned on, press the Select
button to Phone or Collar to pair the
connector to the respective device.
The Connect button is used to connect
the GPS connector to a smartphone
and GPS receiver.
Pairing: Use the Select button to set
the GPS connector to Collar to pair the
connector with the receiver. Set the
GPS connector to Phone to pair the
connector to a smartphone.
Press and hold down the Connect
button until the LED blinks rapidly.
The GPS connector will now be ready
for pairing.
GPS Receiver (PC10U, PR10U)
Power On: To turn the GPS receiver on,
press the Power button until the green
LED turns on.
Power Off: To turn the GPS receiver off,
press the Power button until the LED
turns off.
Pairing: To place the GPS receiver into
pairing mode, begin with the device
turned off and hold down the Power
button until the LED blinks rapidly.
A melody will play when the GPS
receiver is in pairing mode.