Led Indicator - PATHFINDER PT10U Owner's Manual

Splitter Cable
Do not use more than one splitter cable with a single battery charger.

4. LED INDICATOR

Receiver: When turned on, press the Select button to set the GPS connector
to Collar. When set to Collar, a green LED will stay on. Hold down the Connect
button until the LED blinks rapidly to place the GPS connector into pairing mode.
14
GPS Connector (PT10U)
Power: The Power LED blinks every 2
seconds while turned on. The LED colors
represents the battery life: Green when
50-100% battery, Orange when 10-50%
battery, Red when 0-10% battery.
Phone: When turned on, press the
Select button to set the GPS connector
to Phone. When set to Phone, a green
LED will stay on. Hold down the
Connect button until the LED blinks
rapidly to place the GPS connector into
pairing mode.
GPS Receiver (PC10U, PR10U)
The LED on the GPS receiver blinks
while turned on, and the LED colors
represents the battery life: Green when
50-100% battery, Orange when 10-50%
battery, Red when 0-10% battery.