Pairing - PATHFINDER PT10U Owner's Manual

6. PAIRING

PATHFINDER GPS connector connects between your smartphone and
PATHFINDER GPS receiver. These devices need to be paired for the
PATHFINDER system to work properly.
Smartphone
Pairing a Smartphone to the GPS Connector
1) Launch the PATHFINDER app
2) Turn on the GPS connector
3) In the PATHFINDER app, navigate to Menu
4) Set the GPS connector to pairing mode and click 'Start Pairing' in the app
• Once paired, launching the app when the GPS connector is on will
automatically connect the phone and connector together.
• The GPS connector should be within Bluetooth range (33 feet) of your phone
to operate.
• The GPS connector will reconnect with the phone when it is within range.
• Reinstalling the app will require pairing with the GPS connector.
• The PATHFINDER app may need to be restarted for compatibility issues.
Pairing Additional GPS Receivers
Pair the GPS connector and GPS receiver in close proximity to each other.
You can use the PATHFINDER app to check if the GPS receiver is properly
paired.
1) Turn the GPS connector on.
2) Check that the GPS receiver is turned off.
3) Use the Select button on the GPS connector to set the LED to Collar.
4) Hold down the Connect button for 5 seconds until the LED blinks rapidly.
Release the button.
5) Hold down the Power button on the GPS receiver until the LED blinks rapidly
and emits three beeps to show it has coded.
6) The GPS connector and receiver will return to blinking in normal intervals
when pairing is complete.
16
Bluetooth
Max 33 Ft.
PATHFINDER
GPS Connector
(PT10U)
MURS Band
Max 9 Miles
(PC10U, PR10U)
Settings Bluetooth Pairing
PATHFINDER
GPS Receiver