Shutdown; Power Off - Atlas Copco PTS 800 T3 Cud Instruction Manual

When the controller is waiting for the STOP
DETECTION 'MINIMUM START DELAY' to
elapse, an additional timer is shown on the display:
MAIN VIEW
ENGINE STOPPING - DO NOT SWITCH OFF BATTERY
0s
74s
40%
1286h 0RPM
When the STOP SEQUENCE has been completely
terminated, the engine will stop. The controller will
always double check to make sure that the engine has
really stopped.

5.2.7 Shutdown

When the machine is shut down due to a critical alarm
or an emergency stop, the following view is shown.
MAIN VIEW
SHUTDOWN
0.0
180s
10.3 bar
2000 EMERGENCY STOP
Active Buttons:
SET
10.3
bar
bar
Measurement View Button
Settings View Button
Alarms View Button
Enter Button
(to acknowledge the shown alarm))
- 52 -

5.2.8 Power off

The compressor is equipped with a battery switch.
When the compressor is not in use, this switch must
always be in the "OFF" position.
Never use the battery switch for
!
stopping, as this can cause damage
in the Pc4003™ or the engine's
Electronic Control Unit.
Always first shut off the Pc4003™
and wait until the display is dark
before switching the battery switch
to the OFF position.