Markings - Atlas Copco PTS 800 T3 Cud Instruction Manual

3.2

Markings

Atlas Copco labels its products with ISO defined and
other safety markings providing instructions and
information. The markings also warn of hazards. For
convenience and safety, keep all markings in legible
condition, replacing them when damaged or missing.
Replacement markings are available from the factory.
A brief description of all markings provided on the
compressor is given hereafter. The precise location of
all markings can be found in the parts manual of this
compressor.
Warning, burn hazard/hot
surface
Flame
Label needed for transport.
Unit contains flammable liquid
(diesel fuel).
Lift point
Always use the indicated lifting
points for lifting.
No Lift Point
The fixation points may not be
used for lifting. They can be
used for
transport.
Prohibition to open air valves
without connected hoses
fixing during
Rotation direction
Forklift slots
No strapping allowed
Compressor oil drain
Engine oil drain
Engine coolant drain
Fuel drain
Warning!
Part under pressure
- 18 -
Do not stand on outlet valves
Do not clean with high
pressurised water.
1607 8522 82
Sound power level in accordance
with Directive 84/533/EC
(expressed in dB (A))
Automatic water separator drain
Do not tow on road
Air suction
Do not open doors while the
motor is running.
Air discharged from this unit is
not suitable for human
consumption without the
installation of special equipment.
Inhalation may cause serious
injury or death.