Stopping - Atlas Copco PTS 800 T3 Cud Instruction Manual

4. Press the LOAD button.
MAIN VIEW
PREPARING TO LOAD
1.2
bar
40%
1286h 1650RPM
The loading valve is energized and pressure starts
building up.
While loading the following display is shown
(default display).
MAIN VIEW
LOADED - AIR DISCHARGE PRESSURE REGULATION
10.3
bar
40%
1286h 1484RPM
Active Buttons:
SET
10.3
bar
1.2 bar
During the LOADED SEQUENCE, the RPM
SETPOINT
CALCULATED RPM value (if applicable).
SET
10.3
bar
10.3 bar
Stop Button
(to initiate Stop command)
Load Button
(to activate Automatic Load)
Measurement View Button
Settings View Button
Alarms View Button
continuously follows
- 50 -

5.2.6 Stopping

Press the STOP button.
The engine will go into COOLDOWN SEQUENCE.
The following view is shown.
MAIN VIEW
ENGINE COOLING DOWN
0s
1s
40%
1286h
the
Active Buttons:
Start Button
(to initiate Start command)
Measurement View Button
Settings View Button
Alarms View Button
180s
1200RPM 8.4 bar