Installation Options - GE GX1S01R Installation Instructions Manual

Ge single stage drinking water filtration unit

Hide thumbs

Table Of Contents

Table of Contents

Available languages

CAUTION:

For connection to cold water line only.

Option 1: For connection to primary sink faucet

NOTE: For use with filter element FXUTC ONLY.

Use of other filter elements could adversely affect

main faucet flow rate.

1. Shut off cold water supply.

2. Cut out a section of pipe.

3. Make connections as shown.

4. Fully open the cold water faucet.

5. Slowly turn on the cold water supply valve

and check for leaks.

6. Allow cold water to run until air is removed

from water.

Option 2: For connection to secondary filtered

water faucet

NOTE: For use with FXUTC or FXULC (rev. 2)

filter elements.

■ See Required Parts for Installation on page 1.

■ Faucet – UCFCTBL or UCFCTWW

■ Sump Wrench – UCWRNCH

1. Shut off cold water supply.

2. Make connections as shown.

3. Fully open cold water faucet.

4. Slowly turn on cold water supply valve

and check for leaks.

5. Allow cold water to run until air is removed

from water.

NOTE: Sump wrench (UCWRNCH) and faucet (UNFCTBL)

are sold separately for model GX1S01R.

Mounting bracket to wall

The bracket can be used as a template for marking

the location of the mounting screws. When determining

the location of the bracket make sure you leave 1

to 2" of free area under the sump to allow for sump

removal and enough space on either side to make

the tubing connections.

NOTE: Predrill 1/4" holes in wall for easy installation.