Systemvu Control System; Systemvu Interface; Additional Systemvu Installation And Troubleshooting - Carrier 48GC 04-06 Series Service And Maintenance Instructions

Single package rooftop gas heat/electric cooling unit with puron (r-410a) refrigerant 3 to 5 nominal tons
Table of Contents

Advertisement

SYSTEMVU CONTROL SYSTEM

The SystemVu™ control is a comprehensive unit-management
system. The control system is easy to access, configure, diag-
nose and troubleshoot.
The SystemVu control system is fully communicating and
cable-ready for connection to the Carrier Comfort Network
(CCN), Carrier i-Vu
®
, and Third Party BACnet
management systems. The control provides high-speed com-
munications for remote monitoring via the Internet. Multiple
units can be linked together (and to other Direct Digital Con-
trol (DDC) equipped units) using a 3-wire communication bus.
The SystemVu control system is easy to access through the use
of a integrated display module. A computer is not required for
start-up. Access to control menus is simplified by the ability to
quickly select from 7 main menu items. An expanded readout
provides detailed explanations of control information. Only
6 buttons are required to maneuver through the entire controls
menu. The display readout is designed to be visible even in
bright sunlight. See Fig. 59.
1. Third-party trademarks and logos are property of their respective
owners.
J2
J1
TB1
®
®1
building
J3A
J3B
J3C
J3D
J3E
J4
TB2
TB3
Fig. 59 — SystemVu Control

SystemVu Interface

This integrated device is the keypad interface used to access
the control information, read sensor values, and test the unit.
The interface is located in the main control box.
Through the SystemVu interface, the user can access all of the
inputs and outputs to check on their values and status, config-
ure operating parameters, and evaluate the current decision sta-
tus for operating modes. The control also includes an alarm
history which can be accessed from the display. The user can
access a built-in test routine that can be used at start-up com-
missioning and troubleshooting.
Additional SystemVu Installation and Trouble-
shooting
Additional installation, wiring and troubleshooting information
for the SystemVu Controller can be found in the following
manual: "48/50FC 04-07, 48/50GC 04-06 Single Package
Rooftop Units with SystemVu™ Controls Version X.X Con-
trols, Start-up, Operation and Troubleshooting."
J5
J6
J7
J18
J20
36
J8
J9
J17
J16
J15
TB4
TB5
J10
J11
J12
J13
J14

Advertisement

Table of Contents
loading

Table of Contents