Touch Sensor Tone; Security Code; Manual Clock Adjustment; Date Adjustment - Kenwood X838 Instruction Manual

Press the Reset button and when it's removed from the
battery power source
1
Turn the power ON.
2
Do the step 4 through 7 step operation, and reenter the

security code.

"APPROVED" is displayed.
The unit can be used.
If an incorrect code is input, "Waiting" is displayed, and the input
prohibited time shown below is generated.
After the input prohibited time lapses, "CODE" is displayed, and
input can be done.
Number of times
the incorrect code was input
1
2
3
4

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"Beep ON"
"Beep OFF"

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page
28) is set as OFF.
Input prohibited time
—
5 minutes
1 hour
24 hours
Setting
Beep is heard.
Beep canceled.
— 27 —
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.

Date Adjustment

1
Select Date Adjust mode
Press the [FM] or [AM] button.
Select the "Date Adjust" display.
2
Enter Date Adjust mode
Press the [4] or [¢] button for at least 1 second.
The date display blinks.
3
Selecting the item (day, month, or year) to adjust
Press the [4] or [¢] button.
The items that are blinking are items that can be adjusted.
4
Adjust each item
Press the [FM] or [AM] button.
5
Repeat step 3 and 4 operation and adjust the date.
6
Exit Date adjustment mode
Press the [MENU] button.