Dell Inspiron 14 5435 Owner's Manual page 88

Table 29. System setup options — Advance menu (continued)
Advanced
SATA/NVMe Operation mode
Adapter Warnings
Function Key Behavior
Keyboard Illumination
Keyboard Backlight with AC
Keyboard Backlight with Battery
Battery Health
External USB Ports
Enable Audio
Microphone
Camera
Secure Digital (SD) Card
Battery Charge Configuration
Advanced Battery Charge Configuration
88 BIOS setup
NOTE: You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is disabled.
By default, the option is enabled.
Allows the user to configure the operating mode of
the integrated SATA hard drive/NVMe solid-state drive
controller.
By default, the AHCI option is selected.
Allows the user to choose if the computer should display
warning messages when you use AC adapters that are not
supported by your computer.
By default, the option is enabled.
Allows the user to set the default key behavior of the
function key.
By default, the Multimedia Key option is selected.
Allows the user to set the keyboard illumination level.
By default, the Bright option is selected.
Allows the user to set the keyboard backlight timeout
duration when the computer is running on AC power. The
keyboard backlight timeout value is only in effect when the
backlight is enabled.
By default, the Keyboard Backlight with AC value is set to
1 minute.
Allows the user to set the keyboard backlight timeout
duration when the computer is running on battery power.
The keyboard backlight timeout value is only in effect when
the backlight is enabled.
By default, the Keyboard Backlight with Battery value is
set to 1 minute.
Displays the battery health of the computer.
Enables or disables the external USB ports.
By default, the option is enabled.
Enables or disables the audio.
By default, the option is enabled.
Enables or disables the microphone.
By default, the option is enabled.
Enables or disables the camera.
By default, the option is enabled.
Enables or disables the secure digital card slot.
By default, the option is enabled.
Allows the user to set the battery charge settings, with a
preselected custom charge start and stop time.
By default, the Adaptive option is selected.
Enables or disables the advanced battery charging feature.