Steps
1. Place the coin-cell battery on the slot on the palm-rest and keyboard assembly.
2. Connect the coin-cell battery cable to the connector on the I/O daughter-board.
Next steps
1. Install the
I/O daughter-board
2. Install the
base
cover.
3. Follow the procedure in
Power button
Removing the power button
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
I/O daughter-board
4. Remove the
I/O
daughter-board.
About this task
The following image indicates the location of the power button and provides a visual representation of the removal procedure.
cable.
After working inside your
Before working inside your
cable.
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
67