Table of Contents
Advertisement
~10mm
PREPARATION AND ASSEMBLY OF THE CUPBOARD DOOR
The dimensions of the cupboard door should be:
•
width min. 595 - max. 598 mm;
•
thickness 16-22 mm.
1. Remove the screws of the top cover on the rear of
the appliance and install the anti-tilting device as
shown in the drawing.
2. Adjust the anti-tilting device so that the distance
from the counter is 10mm. Loosen the nut counter-
clockwise with a 3mm wrench. Adjust the height and
turn the nut clockwise to fix it.
Factory pre setting
The appliance is originally pre set for the assembly of
a cupboard door opening from right to left.
The best solution would be to screw
the upper hinge to the upper hole of the
top plate and the lower hinge to the
lower hole of the bottom plate.
13
Advertisement
Table of Contents
