Sequence Of Operations - Electrolux Talkie Service Manual

4.4 Sequence of operations

1. Open the door and press S0 button:
The LCD display lights up with a welcome message
2. Select delayed start if desired (see 4.3.10) and/or any desired options
3. Select the desired programme
The following appears on the LCD:
The name of the programme
The time from the beginning to the end of the cycle, in minutes
The number of segments corresponding to the number of phases in the selected wash cycle
The symbols that characterise the programme
4. Press the "OK/START" button and close the door
If delayed start has been selected:
The countdown starts: The time decreases by hours [19 hrs – 18 hrs .....1 hr] and by minutes
during the final hour [1 hr - 59 min – 58 min... 0]
When the countdown is over, the machine starts automatically
5. During the cycle, the Beam on Floor, if featured, will project a beam on the floor
NB: The time to the end of the cycle decreases by minutes and is updated at the beginning of every
new phase in the cycle.
6. To interrupt a programm in progress:
Open the door carefully
or
Switch the appliance off with S0 button
NB: To restart the programme, close the door and/or press button S0 once again
7. To cancel a programme in progress:
Open the door carefully
Simultaneously press the buttons associated to "Cancel" function
The display shows the message "Interrupt?"
Press the "OK/START" button to confirm cancellation
8. At the end of the programme:
The buzzer sounds a number of times
The Beam on Floor, if featured, will switch off
The display shows END OF CYCLE and SWITCH OFF
9. Press button S0 to turn the appliance off
17