Table of Contents
Advertisement
BEFO RE RE Q
If it appears that the CD- system is faulty, first consult this check list.
It may be that something simple has been overlooked.
circumstances
attempt to repair the system ; this will invalidate the
warranty.
1. After pressing the Power On/Off
does not light.
- The button was not pressed in sufficiently.
- One of the plugs on the power cable is not connected or is not
making contact.
There is no supply at the power socket.
cial appliance and check if that works.
2. The caddy cannot be loaded into the caddy slot.
- A disc is already loaded; unload it.
The caddy is being held upside down.
3. After loading, the Start up screen does not change.
- The disc has been inserted upside down in the caddy disc
holder.
The disc has become dirty. Try cleaning it or using another disc.
- The disc is defective. Try another disc.
4. No video is being displayed.
- The display unit is not switched on.
The video source selector on the display unit (if used) is incorrect-
ly
set.
- The video connection is faulty.
- The display unit is not working.
video source.
5. Video is being displayed, but there is no sound.
- Mute is active.
- The amplifier" is not switched on.
- The amplifier" source selector is incorrectly set.
The amplifier" or the loudspeakers are not working.
Check with another sound source.
- The audio
connections are faulty.
* If used
6. Distorted sound from the Stereo HiFi system.
- Audio connections made by mistake to the Phono input.
7. The picture is rolling vertically and/or is only in black and white.
The 525/625 lines selector is incorrectly set.
Switch over and press the Return to Zero DO key.
8. The cursor is not responding to the mouse.
Check the connection cable and press the Return to
Zero >04 key.
9. The system does not respond or responds incorrectly, after taking
out a disc.
- Press the Return to D0 key.
UESTINGSERVCE
button.
the power indicator
Plug in another electri-
If possible, check with another
Under no
15
Advertisement
Table of Contents
